Contact
Site map
Legal information
Torque sensor
0143/03 SD série H - Torque sensor
- Range from 2 to 20 Nm (17.7 in.lbs to 177 in.lbs)
- Precision: 0.2% capacity
- Rotation measurement angle
- Rotation angle measurement
- Standard hexagon ¼" connection
The torque sensors series 0143 is designed with a rotation shaft supported by two bushings. The shaft is equipped with strain gages. Hard silver brushes with slip rings transfer excitation and signal.
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | 0.015 |
| Zero creep on compensated range | %Em/°C | 0.015 |
| Linearity deviation | %EM | < 0.2% capacity |
| Sealing | IP 40 | |
| Capacity | Nm | +/- 2, 6, 12, 20 |
| Sensitivity at full range | mV/V | 1 (2 and 6 Nm) (17.7 and 53 in.lbs) 2 (12 and 20 Nm) (106 and 177 in.lbs |
| Safe overload | %EM | 150 |
| Operating temperature | °C | +5 to +50 (40°F to 120°F) |
| Excitation voltage | V | 5 to 15 |
Outside dimensions
Options
Option A : measurement of rotation angle 2x360 pulse, 90° displaced, TTL
Wiring
6 pins male DIN 45322 connector for standard model. 12 pins connector with option A (rotation angle measurement)
| Prise | |
| 1 | - Alimentation |
| 2 | + Alimentation |
| 3 | NC |
| 4 | + Mesure |
| 5 | - Mesure |
| 6 | Cran de calibration à 100% |
