Contact
Site map
Legal information
Torque sensor
0143/03 SD série Q - Torque sensor
- Range 12 to 1000 Nm (106 in.lbs to 8,843 in.lbs)
- Precision: 0.2% capacity
- Rotating speed : 3,000 rpm maxi
- Angle measurement
- Square connection Q/QA
The torque sensors series 0143 is designed with a rotation shaft supported by two bushings. The shaft is equipped with strain gages. Hard silver brushes with slip rings transfer excitation and signal.
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | 0.015 |
| Zero creep on compensated range | %Em/°C | 0.015 |
| Linearity deviation | %EM | < 0.2 |
| Sealing | IP 40 | |
| Capacity | Nm | +/- 12, 25, 63, 160, 500, 1000 |
| Sensitivity at full range | mV/V | 2 |
| Safe overload | %EM | 150 |
| Operating temperature | °C | +5 to +50 (40°F to 120°F) |
| Excitation voltage | V | 5 to 15 |
Outside dimensions
Options
Option A : Measure of rotation angle 2x360 pulse TTL 90° phase displaced
Wiring
6 pins male connector DIN 45322 for the standard model
12 pins male connector for the option A ( angle measurement )
| Prise | |
| 1 | - Alimentation |
| 2 | + Alimentation |
| 3 | NC |
| 4 | + Mesure |
| 5 | - Mesure |
| 6 | Cran de calibration à 100% |
