Contact
Site map
Legal information
Torque sensor
C 110 B - Torque sensor
- Range from ± 20 ± 2000 Nm
- Low overall dimensions
- Vertical or horizontal operation
- Stainless steel body
- Output in mV/V
C 110 B torque sensor series are stainless steel equiped with strain gages
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | +/- 0.02 |
| Zero creep on compensated range | %Em/°C | +/- 0.015 |
| Initial imbalance | %Em | +/- 2 |
| Hysteresis deviation | %EM | +/- 0.15 |
| Linearity deviation | %EM | 0.35 |
| Capacity | Nm | +/- 20, 50, 100, 250, 500, 1000, 2000 |
| Input resistance | Ohm | 350 |
| Output resistance | Ohm | 350 |
| Electrical insulation | MOhm | > 1000 under 40 V |
| Material | Body: stainless steel Cover: aluminium alloy | |
| Sensitivity at full range | mV/V | 1,5 to 2 |
| Safe overload | %EM | 150 |
| Operating temperature | °C | -20 to +100 (-4°F to 210°F) |
| Compensated temperature | °C | +10 to +70 (50°F to 160°F) |
| Excitation voltage | V | 10 |
Outside dimensions
Options
Out of catalog ranges
Wiring
Output with Jaeger 533801 base connector, female plug included
| Prise | |
| 1 | + Alimentation |
| 3 | - Alimentation |
| 4 | + Mesure |
| 2 | - Mesure |
| EM en Nm | 20 | 50-100 | 250-500 | 1000-2000 |
| A | 10 | 15 | 15 | 30 |
| B | 22 | 22 | 40 | 50 |
| C | 48 | 48 | 74 | 100 |
| D | 58 | 58 | 88 | 110 |
| E | M6 | M6 | M10 | M12 |
| F | 34 | 34 | 60 | 80 |
| G | 10 | 10 | 15 | 20 |
| H | 3 | 3 | 3 | 4 |
| J | 2,5 | 2,5 | 2,5 | 3 |
| L | 60 | 60 | 90 | 116 |
