Contact
Site map
Legal information
Torque sensor
0125 DF - Torque sensor
- Range from 100 to 20,000 Nm (885 in.lbs to 177,000 in.lbs)
- Precision: 0.2% capacity (option 0.1% capacity)
- Brushless technology
- Output signal +/- 5 VDC
- Rotation speed 12,000 rpm
- No internal bearings
The torque sensor 0125 DF series is designed base on a no bearing technolgy. The torque signal is transmitted from the rotating shaft via frequency modulation without contact.
| Technical specification | ||
|---|---|---|
| Band pass | kHz | 1 KHz |
| Consumption | mA | 200 |
| Sensitivity creep on compensated range | %/°C | 0.01 |
| Zero creep on compensated range | %Em/°C | 0.005 |
| Linearity & hysteresis deviation | % EM | < 0.2 standard < 0.1 option |
| Sealing | IP 54 | |
| Capacity | Nm | 100, 200, 500, 1000, 2000, 4000, 10000, 20000 |
| Speed measurement | Pulses/tour | 60 option |
| Output signal | Vdc | ± 5 VDC standard Frequency 60 to 140 KHz for: -Capacity...+Capacity (option) ±10 VDC (option) |
| Operating temperature | °C | 0 to +70 (32°F to 160°F) |
| Compensated temperature | °C | +10 to +60 (14°F to 140°F) |
| Excitation voltage | V | 16...30 VDC |
Outside dimensions
Options
Option N : Rotation speed measurement
Option F : Output frequency signal
