Contact
Site map
Legal information
ELECTRONIC of CONDITIONING
TM 9000 - Signal conditionner/amplifier
- Display 20,000 points
Analog output ± 10 VDC ou 4-20 mA
Input: Gages bridge, Pt100, thermocouple
2 or 4 level detection
Peak reading (TM9200)
Strain gages sensors must be associated with a signal conditioner to be able to use the necessary industrial functions and specifically in the assembly effort process control.
| Technical specification | ||
|---|---|---|
| Display | 20000 points LED | |
| Excitation voltage | 220 V - 50 Hz | |
| Sensor excitation voltage | 10 VDC | |
| Calibration reference resistor | 1 mV/V | |
| Dimensions | Large 240 - Depth 188 - Height 92 | |
| Precision at 25°C | ± 0.05% reading, ± 1 digit | |
| electrical installation | Jaeger 4 pins base connector (sensor) Jaeger 3 pins base connector (levels) | |
| Zero adjustment | ± 1 mV/V | |
| Sensitivity at full range | mV/V | from 0.5 to 5 mV/V |
| Standard analogic output | ± 2 V | |
| Operating temperature | °C | 0 to +60 (32 to 140°F) |
Options
We offer various functions described here under with the TM series
TM9100 : insures the signal sensor conditioning, amplification and front panel display of the value in a selected unit with the use of a calibration shunt of 1mV/V and adjustments of zero and gain.
TM9200 : same as TM9100 with peak value memory.
TM9300 : Same as TM9200 with the detection of adjustable mini and maxi level control on full measurement range.
TM 9400 : Same as TM9300 with memory storage of the instant value triggered by an outside pulse and an additional trigger level control.
TM 9401 : Same as TM 9400 with 2 values for each trigger level switchable with a front panel switch. This function is required on certain press processes.
TM 9301 : Same as TM9300 with the 2 switchable trigger level values as in TM9401.
TM9431 : Same as TM 9401 with a second maximum trigger level.
| Options | Modèle | |
| 1 | Alimentation 110V-60Hz | Tous |
| 2 | Alimentation 24 VDC (pas de sortie courant dispo) | Tous |
| 3 | Entrée Pt100 4 fils avec linéarisation | TM 9100 |
| 4 | Entrée thermocouple | TM 9100 |
| 5 | Sortie analogique 0-10 ou ± 10 VDC ajustable face arrière | Tous |
| 6 | Sortie analogique 4-20 mA ajustable face arrière | Tous |
| 7 | Sortie analogique 0-20 mA ajustable face arrière | Tous |
| 8 | 2 points de consigne réglables en face avant avec sortie relais | TM 9100 |
| 9 | 3 points de consigne réglables en face avant avec sortie relais | TM 9100 |
| 10 | 4 points de consigne réglables en face avant avec sortie relais | TM 9100 |
| 12 | Sortie RS 232 C | Tous |
| 13 | Batterie rechargeable, autonomie 8 heures | Tous |
| Caractéristiques particulières | |
| TM 9100 | Modèle standard |
| TM 9200 | |
| Mémoire de crête | Bande passante : 5 Hz 500 Hz ajustables |
| Polarité : Positive et négative | Perte 0,05% / mn environ |
| TM 9300 | |
| Mémoire de crête | Idem TM 9200 |
| Détecteurs de seuils | Niveaux de 0 pleine échelle |
| Contact 1 RT 50 VA libre de potentiel | Hystérésis : oui |
| TM 9400 | |
| Détecteurs de seuils | Idem TM 9300 |
| Blocage analogique | Bande passante : 5 Hz 500 Hz ajustables |
| Polarité : Positive et négative | Perte 0,05% / mn environ |
