Contact
Site map
Legal information
ELECTRONIC of CONDITIONING
MP 2501 - Portable signal conditionner
- Portable casing
Rechargeable battery
Display 2000 or 20000 points on selectable unit
Designed for gage and potentiometer sensors
Peak measurement
The MP 2501 conditioner is designed to be associated with a large range of gage sensors (pressure, load, torque, displacement) and potentiometers.
MP 2501 : standard gagessensors
MP 2501 S : Semi conductor gage sensor
MP 2501 P : Potentiometer sensor
| Technical specification | ||
|---|---|---|
| Display | 2000 point LCD display. Front panel programmable precision display | |
| Excitation voltage | Internal batteries 12V / 0.8 Ah | |
| Sensor installation | Front panel AMPHENOL base connector | |
| Calibration reference resistor | Front panel press switch | |
| Gain range | Front panel potentiometer | |
| Zero range | Front panel potentiometer | |
| Precision | 5 x 10 power-4 | |
| Operating temperature | °C | 0 to +50 (32 to 120°F) |
Options
C - peak storage value : band pass 100 Hz, front panel reset
5 - Analog output ± 10 V
11 - 20000 point display
