Contact
Site map
Legal information
ELECTRONIC of CONDITIONING
TEMODE-L-L - Signal conditionner
- Very high precision
Fully programmable, without pulldown menu, with only 4 front panel touch keys
4 or 6 wire installation
4 350 ohms sensors
Output insulation
Auto calibration or with a known signal
Selectable functions (level, peak, valley, tare )
Linearisation
The TEMODE conditioner is designed to be associated with a large range of gage sensors (pressure, load, torque, displacement) and potentiometers. It allows for a direct reading in the selected unit (bars, daN, m.daN, mm) after a simple adjustment of zero and full scale
| Technical specification | ||
|---|---|---|
| Display | digit | 6 digits / ± 32 000 points Refresh rate 2 readings/seconde |
| Sensor excitation voltage | 10 V DC - 120 mA (4 sensors 350 W) | |
| Dimensions | 90 x 247 x 180 (H x L x P) | |
| Functions | ·Peak (Band pass max. 10 Hz) ·Low (Band pass max. 10 Hz) ·Tare ·10 points linearisation | |
| Input range | ± 50 mV | |
| Options | TEMODE-P : For potentiometer sensors | |
| electrical installation | Scew type connector | |
| Output options | ·2 alarms with relays ·4 alarms with relays ·Isolated analog output 4/20 mA or 0/10 V ou +/- 5V (BP max 10 Hz) ·Serial isolated output RS 232 | |
| Operating temperature | °C | - 10 to + 50 (50 to 122°F) |
| Excitation voltage | V | Standard 95 to 265 VAC Option : 11 to 30 VDC |
Installation
The functions PEAK, VALLEY, TARE are eith front panel touch keys or by outside commands
