Contact
Site map
Legal information
ELECTRONIC of CONDITIONING
ME 5400 RL - Signal conditionner/amplifier
- Designed for strain gages sensors
Format EUROPE
Card version : ME 5400
Front rack panel : ME 5400 RL
Front rack casing : MR 5400 CRL
Constant sensor voltage excitation
Adjustable gain with range switch and 10 turn potentiometer, located on front panel from 10,000 to 30,000
Analog output control with BCN on front panel.
Adjustable balance with 10 turn potentiometer ans led control of zero.
Shunt reference integrated.
High stability bridge complement for 1/4 bridge, 1/2 bridge, 120 and 350 ohms and full bridge.
Precision 0.05%
The ME 5400 conditionneur is designed for static measurement and/or dynamic measurement from 1/4, 1/2 or full bridge, or large range gages sensor ( pressure, load, torque, displacement)
The format EUROPE allows for an easy existing rack installation.
| Technical specification | ||
|---|---|---|
| Excitation voltage | V | ± 15 ± 1 V |
| Sensor excitation voltage | Adjustable from 4 to 12 V régulated 10-5 (factory setup at 10V) | |
| Band pass | 0-15 KHz on maximum gain(factory setup at 500 Hz) | |
| Consumption | mA | from ±70 to ±150 depending on options |
| Calibration reference resistor | With counter voltage 1 mV/V or 10 mV/V precision 5.10-4 oo shunt | |
| Input resistance | Ohm | >= 10 power 12 |
| Zero range | Standard gages ± 0,5mV/V Semi conductor ±5mV/V | |
| electrical installation | DIN 41612 connector - 2X32 pins | |
| Output signal | Vdc | ±10 (20 mA maximum) |
| Operating temperature | °C | 0 to +50 |
| Storage temperature | -10 to +70°C | |
Installation
ME 5400 : Format EUROPE 100 x 160 H. 20mm
ME 5400 R : front panel rack width 8F (1 F = 5,08 mm)
