Contact
Site map
Legal information
ELECTRONIC of CONDITIONING
MCJ - Signal conditionner/amplifier
- Designed for strain gage sensors or potentiometers
DIN rail fixture
Front panel calibration shunt
Compatible with the MCS trigger level modules
The MCJ conditioner is fixed on a DIN rail in a polyamide casing. the I/O electrical connection are through a screw type connector. It has a calibration shunt. All adjustments are made with multi turn trimmers and DIP switches with fine tuning adjustment.
| Technical specification | ||
|---|---|---|
| Excitation voltage | V | 24 VDC +/- 4V |
| Sensor excitation voltage | 10 V / 30 mA for a 350 ohms sensor | |
| Band pass | factory setup - cut off frequency - 3dB 2nd order filter | |
| Consumption | mA | 70 mA for a 350 ohms sensor (excitation 24 V/output voltage) |
| Calibration reference resistor | Standard strain gages 1mV/V Semi-conductor gages 10mV/V 5 V potentiometer Precision 0.05% | |
| Dimensions | 22.5 X 75 X 102 (LXHXP) | |
| Linearity deviation | %EM | 0.05 |
| Fixtures | On DIN rail Profil EN 50035 Profil EN 50022 (35X15) Profil EN 50022 (35X7.5) | |
| Input resistance | Ohm | > 10 power9 ohms |
| Gain range | Standard gages: 140 to 2400 ( 5 to 7 mV under 10V) Semi conductor gages: 18 to 130 (77 to 550 mV under 10V) Potentiometer 0.0 to 2.1 gain ranges are adjustable through DIP switch and trimmers | |
| Zero range | Standard gages +/- 20 to +/- 100% depending on gain semi conductor gages: +/-20 +/-100% en fonction du gain potentiometer 100% Zero ranges are adjustable through DIP switch and trimmers | |
| electrical installation | 2 connector with 6 contacts srew type connector | |
| Output signal | Vdc | Bipolaire +/- 10 V (10 mA maximum) |
| Operating temperature | °C | 0 to +50 (32 to 120°F) |
| Storage temperature | -30 to +85°C (-22 to 185°F) | |
Options
S - Semi conductor version : MCJ-S
P - potentiometer version : MCJ-P
6 - Current output 4-20mA
7 - Current output 0-20mA
Excitation sensor 5 V
