Contact
Site map
Legal information
INCREMENTAL POSITION SENSORS
Série P - Position sensor
- Precision ± 0.1% capacity
- Infinite resolution
- Ranges up to 50 meters
- Circuit A : output up to 25V
- Measuring cable interchangeable
- Hybrid potentiometer
The P series sensor allows for a precise measurement from 0-50mm to 0-50m ranges.
The moving part is attached to the cable end, while the body is fixed. The cable movement pulls a spring attached to a potentiometer. The cable spring maintain a constant pull back tension on the cable. When high speed measurement is required, 50g and 100g acceleration option are available. The precision is maintained on both movements. The excitation voltage of the potentiometer is either AC or DC up to 25V.
| Technical specification | ||
|---|---|---|
| Excitation voltage | VAC ou DC | 25 maximum |
| Shock | g/10ms | 50 |
| Capacity | Cm | 5 to 5,000 |
| Moisture | %HR | 95 to 25°C |
| Input resistance | Ohm | Circuit A : 500 Circuit B : 1250 |
| Output resistance | Ohm | Circuit A : 500 Circuit B : 20000 |
| Material | Anodise aluminium and stainless steel | |
| Precision | %EM | +/- 0.1 |
| Resolution | Infinite | |
| Operating temperature | °C | -17 to 90°C (1°F to 195°F) |
| Vibration | g/20 à 2000 Hz | 20 |
Outside dimensions
Options
Circuit B (wheatstone bridge) allows for zero and capacity adjustment.
Precision 0.1% capacity for 0-2" and 0-5"
Low temperature -50°C (-58°F)
Cable acceleration 50g or 100g
Reinforced version with thicker cable
Application
Bench test for the automotive and aircraft industry
Hydraulic and mechanical presses
Vavles and doors positionning for the robotic industry
Forklift position
Wiring
Base connector : AMPHENOL MS 3102A 14S 6P or equivalent
Free connector : AMPHENOL MS 3106A 14S 6S or equivalent
| Circuit A | Circuit B | |
| A | + Alimentation | + Alimentation |
| B | Commun | - Alimentation |
| C | + Mesure | + Mesure |
| D | NC | - Mesure |
