Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
TI - Tension and compression sensor
- Range 1500 daN
- Belt tension measuring device
- Option for extra light weight 75gr
The TI belt tension sensor series is designed to measure tensions load on seat belts during crash tests
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | ± 0.02 |
| Zero creep on compensated range | %Em/°C | ± 0.02 |
| Initial imbalance | %Em | ± 2 |
| Hysteresis deviation | %EM | ± 0.5 |
| Linearity deviation | %EM | ± 0.5 |
| Sealing | IP 54 | |
| Capacity | daN | 1500 |
| Input resistance | Ohm | 350 |
| Output resistance | Ohm | 350 |
| Electrical insulation | MOhm | > 1000 under 40 V |
| Material | Titanium | |
| Weight | g | 100 |
| Sensitivity at full range | mV/V | 2.5 |
| Safe overload | %EM | 150 |
| Operating temperature | °C | 0 to +80 (32°F to 176°F) |
| Compensated temperature | °C | +10 to +70°C (50°F to 160°F) |
| Excitation voltage | V | 5 |
Outside dimensions
Options
Light weight option: 75gr
Wiring
Output 4 conductor cable 6 meter length
| Câble | |
| Rouge | + Alimentation |
| Bleu | - Alimentation |
| Jaune | + Mesure |
| Blanc | - Mesure |
