Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
BD 3 - Tension and compression sensor
- Range from de ± 3 ± 50 daN
- For stick shift diameter 14 or 16mm
- Available in 2 or 3 measuring axis
- Limited interactions
The BD spheres series are designed to measure loads on stick shift operations
| Technical specification | ||
|---|---|---|
| Electrical leakage | %EM | < 0.5 on each 3 axis |
| Hysteresis deviation | %EM | <= 0.1 |
| Linearity deviation | %EM | <= 0.2 |
| Input resistance | Ohm | 350 |
| Output resistance | Ohm | 350 |
| Electrical insulation | MOhm | >1000 under 40V |
| Material | High grade steel | |
| Load range Fx, Fy, Fz | daN | 3, 5, 10, 20, 50 |
| Sensitivity at full range | mV/V | +/- 2 |
| Safe overload | %EM | 150 on each 3 axis |
| Operating temperature | °C | 0 to +50 (32°F to 120°F) |
| Excitation voltage | V | 5 to 10 |
Outside dimensions
Installation
X axis is positionned with a 4mm removable pin
Tightenning with a 4mm Alen key
Application
Measures loads on 3 axes during stick shift operations on 14 or 16mm stick
Wiring
4 conductor braided cable, 3 meters length per channel.
Other length upon request
| Rouge | + Alimentation |
| Bleu | - Alimentation |
| Jaune | + Mesure |
| Blanc | - Mesure |
