Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
CMC 321 - Tension and compression sensor
- Range from 200 to 2000 daN on Fx, Fy, Fz
- Standard gages
- Very good linearity
The multi axis CMC 321 series are designed to mesure load in 3 axes X, Y, Z with a very high precision. A perfect split between axes reduce the interaction to less than 2% of capacity and therefore simplifies the data processing
| Technical specification | ||
|---|---|---|
| Electrical leakage | %EM | < 2 on each 3 axis |
| Hysteresis deviation | %EM | < +/- 0.25 |
| Linearity deviation | %EM | < 0.5 |
| Sealing | IP 65 | |
| Input resistance | Ohm | 350 +/- 1 |
| Output resistance | Ohm | 350 +/- 1 |
| Load range Fx, Fy, Fz | daN | +/- 200, 500, 1000, 2000 |
| Sensitivity at full range | mV/V | About 2 |
| Safe overload | %EM | 150 on each axis |
| Operating temperature | °C | -20 +80 (-4°F to 175°F) |
| Compensated temperature | °C | +10 to +50 (50°F to 120°F) |
| Excitation voltage | V | 5 to 10 |
Outside dimensions
Options
Different capacity between 3 axes up to a relation of 2, with ranges from 200 daN to 2000 daN
Wiring
Male base Jagear 12 pins connector
Female plug included
Axis references engraved
| X | Y | Z | |
| + Alimentation | 9 | 5 | 1 |
| - Alimentation | 11 | 7 | 3 |
| + Mesure | 10 | 6 | 2 |
| - Mesure | 12 | 8 | 4 |
