Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
CMC 301 - Tension and compression sensor
- Ranges from 5 to 100 daN for Fx, Fy and Fz
- Standard gages
- Excellent linearity
- Integrated overload stoppers
- FMEA designed and validated
- Very limited interaction
The multi axis CMC 301 sensor is designed for high precision measuement in 3 axis X, Y and Z. A perfect split between axis limits interactions to a minimum and simplifies the data process.
| Technical specification | ||
|---|---|---|
| Electrical leakage | %EM | < 0.5 on each axis 3 axes |
| Hysteresis deviation | %EM | < +/-0.1 |
| Linearity deviation | %EM | < 0.2 |
| Sealing | IP 65 | |
| Input resistance | Ohm | 410 +/-10 |
| Output resistance | Ohm | 350 +/-1 |
| Load range Fx, Fy, Fz | daN | +/- 5, 10, 25, 50, 100 |
| Sensitivity at full range | mV/V | 2 |
| Safe overload | %EM | 150 on each axis |
| Operating temperature | °C | -20 to +80 (-4°F to 175°F) |
| Compensated temperature | °C | +10 to +50 (50°F to 120°F) |
| Excitation voltage | V | 5 to 10 |
Outside dimensions
Options
Different capacity within the 3 axis, with a relation up to 2, in ranges from 5 daN to 100 daN
Wiring
Male Jaeger base 12 pins connector, Female plug included. Axis references engraved.
| X | Y | Z | |
| + Alimentation | 9 | 5 | 1 |
| - Alimentation | 11 | 7 | 3 |
| + Mesure | 10 | 6 | 2 |
| - Mesure | 12 | 8 | 4 |
