Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
F 521 TC - Tension and compression sensor
- Tension - compression from ± 50 to ± 5000 daN
- Hardened stainless steel all ranges
- Excellent durability
- Compact size
The F521TC series, because of their excellent durability, are specifically designed for any application on bench test fatigue controls and machines controls
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | < 0.02 |
| Zero creep on compensated range | %Em/°C | < 0.015 |
| Initial imbalance | %Em | < +/- 2 |
| Hysteresis deviation | %EM | +/- 0.15 |
| Linearity deviation | %EM | +/- 0.15 |
| Capacity | daN | +/- 50, 100, 250, 500, 1000, 2500, 5000 |
| Input resistance | Ohm | 700 |
| Output resistance | Ohm | 700 |
| Electrical insulation | MOhm | > 1000 under 40 V |
| Material | Stainless steel | |
| Sensitivity at full range | mV/V | 2 +/- 0.1 |
| Safe overload | %EM | 150 |
| Operating temperature | °C | -20 to +100 (-4°F to 210°F) |
| Compensated temperature | °C | +10 to +70 (50°F to 160°F) |
| Excitation voltage | V | 10 |
Outside dimensions
Options
Integrated plate stopper : F521B (overall height + 20mm)
Swivel mount : ES 21 A10 - ES 21 B 16
Wiring
Output with 4 pins Jeager 533801 connector ( male plug and cord grip included )
| Prise | |
| 1 | + Alimentation |
| 3 | - Alimentation |
| 4 | + Mesure |
| 2 | - Mesure |
| EM en daN | Diamètre A | Diamètre B | H |
| 0 250 | 10 pas 150 | 16 | 25 |
| 500 5000 | 16 pas 150 | 20 | 30 |
