Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
Double échelle CDP - Tension and compression sensor
- Overload stopper included on low capacity side
- Tension - compression
- Not sensitive to side forces
- Precision class < 0.1% / capacity
Similar in design to the F612TC and F501TC, these sensors allow for very low capacity (0 to 10daN) and up to 500daN without endangering the low capacity side.
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | < 0.02 |
| Zero creep on compensated range | %Em/°C | < 0.015 |
| Initial imbalance | %Em | +/- 2 |
| Hysteresis deviation | %EM | +/- 0.03 |
| Linearity deviation | %EM | +/- 0.08 |
| Sealing | IP 65 | |
| Capacity | daN | High capacity : +/- 100, 250, 500 Low capacity : +/- 10, 35, 50, 100 |
| Input resistance | Ohm | 350 |
| Output resistance | Ohm | 350 |
| Electrical insulation | MOhm | > 1000 under 40 V |
| Material | Body in hardened steel Cover in steel sheet | |
| Sensitivity at full range | mV/V | 2 |
| Compensated temperature | °C | +10 to +70 (50°F to 160°F) |
| Excitation voltage | V | 10 |
Outside dimensions
Wiring
Output with 8 conductor braided cable, length 1 meter
Other length upon request
| Portée haute | Portée basse | |
| Rouge | Marron | + Alimentation |
| Noir | Bleu | - Alimentation |
| Vert | Jaune | + Mesure |
| Blanc | Orange | - Mesure |
| Portée haute en daN | Portée basse en daN |
| 500 | 10 |
| 500 | 25 |
| 500 | 50 |
| 500 | 100 |
| 250 | 10 |
| 250 | 25 |
| 250 | 50 |
| 100 | 10 |
| 100 | 25 |
