SENSORS of FORCE and WEIGHING

To search for a product, please enter your key words :

If you wish to receive our news information, please enter your email address here :

F501TC series force sensors are specificaly designed for measurement and automation on bench tests and fatigue bench test

Technical specification
Sensitivity creep on compensated range	%/°C	< 0.02
Zero creep on compensated range	%Em/°C	< 0.015
Initial imbalance	%Em	< +/- 2
Hysteresis deviation	%EM	<= 0.03
Linearity deviation	%EM	<= 0.05
Sealing		IP 65
Capacity	daN	+/- 50, 100, 200, 500, 1000, 2000, 5000, 10000
Input resistance	Ohm	350
Output resistance	Ohm	350
Electrical insulation	MOhm	> 1000 under 40 V
Material		Nickel plated steel
Sensitivity at full range	mV/V	1 (50 daN) 2 (other ranges)
Safe overload	%EM	150
Operating temperature	°C	-20 to +100 (-4°F to 210°F)
Compensated temperature	°C	+10 to +70 (50°F to 160°F)
Excitation voltage	V	10

Output through miniature 4 pins Jaeger
Swivel mounts

Output with 4 conductor braided cable, lengthy 1 meter
(Other length upon request)