Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
F 108 TC - Miniature force sensor
- Range from ± 1 to ± 25 daN
- Tension - compression
- Overload stoppers included
- High grade nickel plated steel
- No sensitivity to side forces
- Output 1mV/v
The F108TC series forces sensors are designed to measure very low forces with a very high precision and compact sizes
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | < 0.02 |
| Zero creep on compensated range | %Em/°C | < 0.015 |
| Initial imbalance | %Em | < +/- 2 |
| Hysteresis deviation | %EM | <= 0.05 |
| Linearity deviation | %EM | <= 0.1 |
| Sealing | IP 64 | |
| Capacity | daN | +/- 1, 2, 5, 10, 25 |
| Input resistance | Ohm | 350 |
| Output resistance | Ohm | 350 |
| Electrical insulation | MOhm | > 5000 under 40 V |
| Material | High grade nickel plated steel | |
| Sensitivity at full range | mV/V | 1 +/- 0.2 |
| Safe overload | %EM | 500 in static |
| Operating temperature | °C | -20 +80 (-4°F to 175°F) |
| Compensated temperature | °C | +10 to +70 (50°F to 160°F) |
| Excitation voltage | V | 10 |
Outside dimensions
Options
Swivel mounts
Wiring
Output 4 conductors braided cable
1 meter length
(Other lengths upon requests)
| câble | |
| Rouge | + Alimentation |
| Bleu | - Alimentation |
| Jaune | + Mesure |
| Blanc | - Mesure |
