Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
MFL 10-200 - Weight sensor
- Capacity from 10 Kg to 200Kg
- Interchangeability
- Bending design
- Standard gages
- Tension fixture accessories
- Output 2mV/V
- All parts stainless steel
- IP 67
- High precision
MFL series weight sensors have a range from 10Kg to 200Kg. They are interchangeable with other sources. All parts are stainless steel. The strain gages are protected with hermetically sealed stainless steel welded bellows and accept severe industrial environments. The cable connection is through a braided cable with cord grip.
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | < 0.007 |
| Zero creep on compensated range | %Em/°C | < 0.002 |
| Resolution | %EM | 0.016 |
| Hysteresis deviation | %EM | <= 0.015 |
| Linearity deviation | %EM | <= 0,02 or 3000 d |
| Sealing | IP 67 | |
| Creep after 30 mn | %EM | <= 0.014 |
| Input resistance | Ohm | 400 +/- 10 |
| Output resistance | Ohm | 351 +/- 1 |
| Electrical insulation | MOhm | > 5000 |
| Material | Nickel plated stainless steel | |
| Load | Kg | 10-20-50-100-200 |
| Zero return | %EM | <= 0.01 |
| Sensitivity at full range | mV/V | 2 +/- 0.04 |
| Safe overload | %EM | 150 |
| Limit overload | %EM | > 300 |
| Operating temperature | °C | -20 to +60 (-4°F to 140°F) |
| Compensated temperature | °C | -10 to +40 (14°F to 105°F) |
| Excitation voltage | V | 10 to 12 maxi 15 |
Outside dimensions
Installation
Approval from the Ministry of Industry from 20 to 200Kg - N°95.00.644.003.4 du 1.2.95
Wiring
Output with 4 conductor braided cable, length 3 meters
(other lengths upon request)
| Câble | |
| Rouge | + Alimentation |
| Noir | - Alimentation |
| Vert | + Mesure |
| Blanc | - Mesure |
