Contact
Site map
Legal information
SENSORS of FORCE and WEIGHING
MFL 300-1200 - Weight sensor
- Range from 300 to 1200 kg (660 to 2650 lbs)
- Interchangeable
- Bending design
- Strain gages
- Traction installation set up accessories
- Output 2mV/V
- All parts stainless steel IP 67High presision
The MFL series load cells have a range between 300 to 1200 kg (660 to 2650 lbs).They are interchangeable with other sources. All parts are stainless steel with the stress area equiped with strain gages protected by a hemetically welded stainless steel bellows to ensure the load cell will perform well under harsh conditions. The electrical connection is through a braided cable with cord grip.
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | < 0.002 |
| Zero creep on compensated range | %Em/°C | < 0.007 |
| Resolution | %EM | 0.016 |
| Hysteresis deviation | %EM | <= 0.015 |
| Linearity deviation | %EM | <=0.02 or 3000 d |
| Sealing | IP 67 | |
| Creep after 30 mn | %EM | <= 0.014 |
| Input resistance | Ohm | 400 +/- 10 |
| Output resistance | Ohm | 351 +/- 1 |
| Electrical insulation | MOhm | > 5000 |
| Material | Nickel plated stainless steel | |
| Load | Kg | 300-600-1200 |
| Zero return | %EM | <= 0.015 |
| Sensitivity at full range | mV/V | 2 +/- 0,04 |
| Safe overload | %EM | 150 |
| Limit overload | %EM | > 300 |
| Operating temperature | °C | -20 to + 60 (-4°F to 140°F) |
| Compensated temperature | °C | -10 to + 40 |
| Excitation voltage | V | 10 to 12 max 15 |
Outside dimensions
Wiring
Output 4 conductor braided cable, length 5 meters
(Other lengths upon request)
| Câble | |
| Rouge | + Alimentation |
| Noir | - Alimentation |
| Vert | + Mesure |
| Blanc | - Mesure |
