FrançaisEnglish

Product search

Mailing list

Custom Design

 

CMC 321 - Tension and compression sensor

CMC 321 - Tension and compression sensor
  • Range from 200 to 2000 daN on Fx, Fy, Fz
  • Standard gages
  • Very good linearity

The multi axis CMC 321 series are designed to mesure load in 3 axes X, Y, Z with a very high precision. A perfect split between axes reduce the interaction to less than 2% of capacity and therefore simplifies the data processing

Technical specification
Electrical leakage %EM < 2 on each 3 axis
Hysteresis deviation %EM < +/- 0.25
Linearity deviation %EM < 0.5
Sealing IP 65
Input resistance Ohm 350 +/- 1
Output resistance Ohm 350 +/- 1
Load range Fx, Fy, Fz daN +/- 200, 500, 1000, 2000
Sensitivity at full range mV/V About 2
Safe overload %EM 150 on each axis
Operating temperature °C -20 +80 (-4°F to 175°F)
Compensated temperature °C +10 to +50 (50°F to 120°F)
Excitation voltage V 5 to 10

Outside dimensions

CMC 321 - Tension and compression sensor: Outside dimensions

Options

Different capacity between 3 axes up to a relation of 2, with ranges from 200 daN to 2000 daN

Wiring

Male base Jagear 12 pins connector
Female plug included
Axis references engraved

 XYZ
+ Alimentation951
- Alimentation1173
+ Mesure1062
- Mesure1284
Home | Who | Catalogue | News | Contact | Site map | Legal information