Contact
Site map
Legal information
Custom Design
AD - Load pin
- Range from ± 500 ± 20000 daN
- Stainless steel
- General dimensions changes upon request
- Standard gages
- Easy to set up
The precision AD axes series are manufactured in stainless steel. They can be placed very close to the load to measure without major modification
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | +/- 0.02 |
| Zero creep on compensated range | %Em/°C | 0.015 |
| Initial imbalance | %Em | +/- 2 |
| Hysteresis deviation | %EM | +/- 0.5 |
| Linearity deviation | %EM | 0.5 |
| Sealing | IP 65 | |
| Capacity | daN | +/- 500, 1000, 2500, 5000, 10000, 20000 |
| Input resistance | Ohm | 350 |
| Output resistance | Ohm | 350 |
| Electrical insulation | MOhm | > 1000 under 40 V |
| Material | Stainless steel | |
| Output signal | mV/V | About 1.5 |
| Safe overload | %EM | 150 |
| Operating temperature | °C | -20 to +100 (-4°F to 210°F) |
| Compensated temperature | °C | +10 to +70 (-4°F to 160°F) |
| Excitation voltage | V | 10 |
Outside dimensions
Options
Specific dimensions upon request
| Version câble | |
| Rouge | + Alimentation |
| Bleu | - Alimentation |
| Jaune | + Mesure |
| Blanc | - Mesure |
| EM en daN | Diamètre | A | B |
| 500 | 30 | 25 | 30 |
| 1000 | 30 | 25 | 30 |
| 2500 | 30 | 25 | 30 |
| 5000 | 40 | 25 | 30 |
| 10000 | 50 | 40 | 30 |
| 20000 | 65 | 50 | 30 |
