Contact
Site map
Legal information
PRESSURE SENSORS and TRANSMITTERS
HPS - Pressure transducer
- Range from 1 to 600 bars
- Output 0-5V, 0-10V or 4-20 mA
- Absolute or relative pressure
- High stability over time
- High corrosion resistance
- Excellent linearity
- Excellent resistance against absavive material
- Large temperature range
- Low consumption
- Excellent durability
The HPS series pressure sensor are 25mm diameter withy an output signal of 0-5, 0-10VDC or 4.20mA. The sensing device is made of 4 gages on a ceramic diaphragm. The system is fitted into a 304 stanless steel body. The connector is either DIN or integrated cable with IP65 or IP68
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | < 0.008 |
| Zero creep on compensated range | %Em/°C | < ± 0.015 |
| Initial imbalance | %Em | ± 1 |
| Linearity & hysteresis deviation | % EM | < ± 0.25 |
| Sealing | IP 65 on standard | |
| Capacity | bars | 1, 2, 3, 5, 10, 20, 50, 100, 200, 400, 600 |
| Hydraulic installation | 1/4G male or 1/4 NPT male | |
| Output signal | Vdc | 0-5, 0-10 VDC or 4-20 mA |
| Safe overload | %EM | 150 |
| Operating temperature | °C | - 20 to + 125 (-4°F to +260°F) |
| Compensated temperature | °C | 0 + 100 |
| Excitation voltage | V | 10 to 32 not filtered with an output of 0-5 VDC or 4-20 mA 13 to 32 not filtered with an output of 0-10 VDC |
Outside dimensions
