Contact
Site map
Legal information
PRESSURE SENSORS and TRANSMITTERS
P 133 R - High output pressure sensor
- Relative pressure from 0-5 bars to 0-700 bars
- All parts stainless steel
- Power supply ± 15 V DC ou 24 V DC output 0-10 V
The P 133 series pressure sensor are all stainless steel and include an electronic device for an output of 0-10V
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | ± 0.01 |
| Zero creep on compensated range | %Em/°C | ± 0.01 |
| Hysteresis deviation | %EM | ± 0.1 |
| Linearity deviation | %EM | 0.25 |
| Capacity | bars | 5, 10, 25, 50, 100, 250, 350, 500, 700 |
| Influence of the excitation voltage on the output | 0.003 %range/V | |
| Inversion of polarity | Protection included | |
| Material | Stainless steel | |
| Hydraulic installation | 1/4 gaz female | |
| Output signal | Vdc | 10 |
| Safe overload | %EM | 150 |
| Operating temperature | °C | - 10 to + 80 (14° F to 180° F) |
| Excitation voltage | V | ± 15, ± 1 V or 20-28 V DC |
Outside dimensions
Options
Range out of catalog standards
Male hydraulic connector fitted
male hydraulic connector welded
Wiring
Output 4 conductor braided cable, length 1 meter
(Other length upon request)
or output 4 pin miniature connector
| Version câble | Version prise | |
| Rouge | + Alimentation | 1 |
| Bleu | - Alimentation | 3 |
| Jaune | + Mesure | 4 ou = |
| Blanc | - Mesure | 2 |
