
The P 153 series pressure sensor are manufactured out of stainless steel and include an micro electronic device to supply 4 to 20 mA on a 2 conductor cable
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | ± 0.02 |
| Zero creep on compensated range | %Em/°C | ± 0.01 |
| Hysteresis deviation | %EM | ± 0.1 |
| Linearity deviation | %EM | 0.3 ( from 2 to 10 bars ) ± 0.15 > 10 bars |
| Capacity | bars | 2, 5, 10, 25, 50, 100, 250, 350, 500, 700 |
| Load resistance | Ohm | Up to 1 200 Rc in KOhm = (Vexcit - 12V)/20 mA |
| Influence of the excitation voltage on the output | 0.03 | |
| Inversion of polarity | Protection included | |
| Material | Stainless steel | |
| Hydraulic installation | 1/4 gaz female | |
| Adjustment of zero and scale | On the sensor Adjustment range ± 10% mesuremenr range | |
| Output signal | Vdc | 2 conductors 4-20 mA |
| Safe overload | %EM | 150 |
| Operating temperature | °C | - 10 to + 80 (50°F to 180°F) |
| Excitation voltage | V | 9 to 32 not regulated |
Out of catalog standard range
Male hydraulic connector fitted
male hydraulic connector welded
4 conductor braided cable, length 1 meter
(Other length upon request)
or 4 pin miniature connector
| Version câble | Version prise | |
| Rouge | + Alimentation | 1 |
| Jaune | + Mesure | 2 |