
The PM 204 series pressure sensor allow through their compact size and diaphragm design to be inserted close to the pressure point for all static and dynimic measurement
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | ± 0.007 |
| Zero creep on compensated range | %Em/°C | ± 0.007 |
| Initial imbalance | %Em | < ± 2 |
| Hysteresis deviation | %EM | ± 0.35 |
| Linearity deviation | %EM | 0.35 |
| Sealing | With Oring included | |
| Capacity | bars | 10, 20, 50, 100, 200 |
| Input resistance | Ohm | About 370 |
| Output resistance | Ohm | 350 |
| Electrical insulation | MOhm | > 1000 under 40 V |
| Material | Stainless steel | |
| Electric cable specification | Teflon jacket | |
| Hydraulic installation | Ø M8 pitch 100 or Ø M8 pitch 75 (to be confirmed) | |
| Sensitivity at full range | mV/V | About 1 |
| Safe overload | %EM | 150 |
| Operating temperature | °C | - 50 to + 165 (-60°F to +330°F) |
| Excitation voltage | V | 5 |
Output 4 conductor braided cable, length 1 meter
(Other lengths upon request)
| Version câble | |
| Rouge | + Alimentation |
| Bleu | - Alimentation |
| Jaune | + Mesure |
| Blanc | - Mesure |