Contact
Site map
Legal information
PRESSURE SENSORS and TRANSMITTERS
P 170 TS - Pressure sensor
- Relative pressure from 20 bars to 250 bars
- Operating temperature up to 180° C
- All parts stainless steel
- Compact design
P170 TS series pressure sensors are made of stainless steel and highly compact. They are designed to measure any hydraulic system pressure where high temperature and reduced size is imperative
| Technical specification | ||
|---|---|---|
| Sensitivity creep on compensated range | %/°C | ± 0,004 |
| Zero creep on compensated range | %Em/°C | ± 0,01 |
| Initial imbalance | %Em | ± 2 |
| Hysteresis deviation | %EM | ± 0,1 |
| Linearity deviation | %EM | 0,25 |
| Capacity | bars | 20, 30, 50, 100, 250 |
| Input resistance | Ohm | 360 ± 10 |
| Output resistance | Ohm | 350 |
| Electrical insulation | MOhm | > 1000 under 40 V |
| Material | Stainless steel | |
| Hydraulic installation | Ø 16mm pitch 150 female or 1/4 gaz female | |
| Sensitivity at full range | mV/V | 1 to 1,2 for 20 and 30 bars 1,5 from 50 to 250 bars |
| Safe overload | %EM | 150 |
| Operating temperature | °C | - 25 + 180 |
| Compensated temperature | °C | + 20 + 150 |
| Excitation voltage | V | 10 |
Outside dimensions
Options
Out of catalog standard range
Male hydraulic connector inserted
Wiring
Output through 4 wire teflon cable, length 1m
(Other lengths upon request)
| Version câble | |
| Rouge | + Alimentation |
| Bleu | - Alimentation |
| Jaune | + Mesure |
| Blanc | - Mesure |
